I had a similar problem after installing a new master clutch cylinder. In order to bleed all the air out, the easiest location to use, but tough to get at, is the back of the motor near the firewall. DMC Joe did mine in Memphis and it took about 3 minutes once he removed the engine cover and laid a board on top of the motor for him to stretch over. We had tried from the bottom and couldn't gain access and we figured the top was not accessible. Marvin Stein Printed Drinkware Company 924 Dundas Street London, Ontario, Canada, N5W 3A1 tel: 519-434-1666 fax: 519-434-7071 toll free: 1-866-725-4665 email: marv@xxxxxxxxxxxxxxxxxxxx website: printeddrinkware.com ----- Original Message ----- From: "erikgeerdink" <erikgeerdink@xxxxxxxxx> To: <DMCForum@xxxxxxxxxxxxxxx> Sent: Wednesday, June 18, 2003 9:29 AM Subject: [DMCForum] Re: Grind going to 5th -- (Me Too) > On a side note, my fluid is full. > > Any help with this would be great. I don't like having to let the > car wined down before I shift into 5th. > > Erik > > > --- In DMCForum@xxxxxxxxxxxxxxx, Shannon Yocom <ssdelorean@xxxx> > wrote: > > Erik & others, > > I too have this problem. I haven't noticed the temperature playing > a role in it, > > I will pay more attention to see if it is same as yours. I too > have the ss line, > > but it was doing it before I put that in and continues today. My > master & slave > > are also new (few months old). > > > > Shannon Y > > 16506 > > > > ---------- > > Message: 1 > > Date: Mon, 16 Jun 2003 11:45:57 -0000 > > From: "erikgeerdink" <erikgeerdink@xxxx> > > Subject: Grind going to 5th > > > > When my D is cold, or just getting warm, I can shift into 5th with > > no problems or noises. Once I've been driving a bit and > everything > > is to temp, if I shift into 5th it grinds. If I put the clutch > in, > > let the RPMS go down a bit, and then shift, no grind. I have the > SS > > clutch line and my master and slave were replace around 3 years > > ago/8K miles ago. > > Any ideas? > > > > Erik > > > > __________________________________ > > Do you Yahoo!? > > SBC Yahoo! DSL - Now only $29.95 per month! > > http://sbc.yahoo.com > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > Yahoo! Groups Sponsor <http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512 6215:HM/A=1564416/R=0/SIG=11ti81skc/*http://www.netflix.com/Default?mqso=6 0164797&partid=3170658> <http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm ail/S=:HM/A=1564416/rand=332993593> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>