Re: [DMCForum] rear speaker options
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] rear speaker options



Are you planning on creating your own enclosure? The most accurate sound 
reproduction will be had with round rather than elliptical speakers, so 
if you're going to start from scratch and cut holes in MDF or such 
board, you might as well get a round 8" rather than 6"x9". Especially 
make sure you have space behind them as well for beefy voice coils and 
magnets - at least a few inches to allow everything to "breathe". Also 
consider the density of the material you are mounting them into, 
something dense but slightly flexible if you prefer heavy bass response. 
This will be your "cabinet" ... a pretty good sized cabinet, too. :)

Farrar

-- 
Farrar Hudkins
Announcer/Producer
89.9 WWNO FM New Orleans / 90.5 KTLN FM Thibodaux-Houma
Live audio stream @ www.wwno.org



Yahoo! Groups Sponsor	 
 
<http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512
6215:HM/A=1564416/R=0/*http://www.netflix.com/Default?mqso=60164797&partid
=3170658> 	 
 
<http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm
ail/S=:HM/A=1564416/rand=866078952> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated