--- In DMCForum, "Paul Salsbury" wrote: > Once again I find myself trying to get my central locking working. > But still all I could do is lock both doors from the drivers > side, and unlock neither from either side. [snip] > if both the doors are open and you move the lock rocker > in either door the opposite one try's to move in both > lock and unlock mode. once you close the doors > back to square one. Did you check the switches in both doors? A quick little test for you; open both doors, then with a screwdriver push in all 4 latches. The doors are "closed" now, so you can lock them. If in this position the locks DO work in both directions I'm thinking it's either your switches or their wiring IN the door or in the hinging piece... Don't forget to unlatch both doors with the interior handle before actually closing them, or all you'll get is a big BANG when the latchs hit the pins (don't aske me how I know this :-S) Good luck, Jan van de Wouw Thinking Different... Using a Mac... Living the Dream... Driving a DeLorean... DMC-12 "Dagger" since Sep. 2000 100NX "Saphire" since Nov. 2002 -------------------------------- Yahoo! Groups Sponsor <http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512 6215:HM/A=1564415/R=0/*http://www.netflix.com/Default?mqso=60164784&partid =3170658> <http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm ail/S=:HM/A=1564415/rand=787263043> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>