> What is the secret to taking the front rotors off? I'm not sure what you mean about "D" nut. You take the big nut off, and there is a "D" washer under it. (I have seen different DeLoreans use different size nuts.) Once the nut is off then the hub & rotor should pull straight off. Try spraying some penetrating oil in there first. Also tapping around with a brass hammer might help loosen it up. I never tried taking the nut off the backside (except for removing an angle drive.) I have heard stories about the spindle spinning with nothing to grab onto. So I would attack it first from the outside. Walt ------------------------ Yahoo! Groups Sponsor ---------------------~--> Make Money Online Auctions! Make $500.00 or We Will Give You Thirty Dollars for Trying! http://us.click.yahoo.com/yMx78A/fNtFAA/i5gGAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>