[DMCForum] Re: Sanden 508 or 510, what should I use? Vin 3323 Update
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Sanden 508 or 510, what should I use? Vin 3323 Update



Hey Marc,

Well the system is not under vacuum and the dryer seems really dry
(especially out here in Colorado).  Do you think it's still useable? 
I guess putting the system under vacuum would probably tell? 

I'll definitely replace the orifice tube....and am looking for a
cheap AC compressor as well....

Anyone got a compressor lying around that they're looking to get rid
of??

Thanks,

Brandon
Vin 3323

--- In DMCForum@xxxxxxxxxxxxxxx, Marc Levy <malevy_nj@xxxx> wrote:
> IIRC: If I Recall Correctly
>
> When I did the AC in 01860, It was the first time I
> realized that there was an early and later style
> dryer.  The 10 min of research I did on it led me down
> the path of having to change hoses to make the new
> dryer fit.  For whatever reason, I decided not to do
> it and just re-used my old dryer....  But when I
> evacuated the system, I heat it up with a heat gun to
> boil the moisture out of the dryer (Water boils at
> lower temperature under vacuum, so don't make it too
> hot!).  After re-charging with R-12, it has been
> running fine since the summer of 2002.
>
> A call to Grady will probably get you a list of
> exactly what you need to convert to the newer style
> dryer.  I don't know if the Corvette is a direct
> replacement for it though.
>
>
> --- brandelorean <brandelorean@xxxx> wrote:
>
> > Hey Marc,
> >
> > The High & Low length of the body hoses?  Or all 3
> > Hoses?
> >
> > Also, what does IIRC mean?   
> >
> > DAVE, do you know a cross reference for the earlier
> > drier?
> >
> > Thanks,
> >
> > Brandon
> > Vin 3323
> >
>
>
>            
> ____________________________________________________
> Start your day with Yahoo! - make it your home page
> http://www.yahoo.com/r/hs




YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated