 
Re: [DMCForum] wheels shake update...again
    
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DMCForum] wheels shake update...again
- From: DMCVIN6683 <dmcvin6683@xxxxxxxxx>
- Date: Wed, 10 Aug 2005 21:31:07 -0500
I had bad rear tires on my car plus bent Trailing arm bolts and one 
Trailing arm bolt bushing was shaped like Pac-Man and had the same 
vibration. I replaced it all and it is as smooth as silk now.
All my tires were balanced off the car.
Mark V
On Aug 10, 2005, at 9:30 PM, Erik Geerdink wrote:
> Ok, so I went under the car and retorqued everything.  I also reseated 
> the steering rack to make sure.  I did notice that the sway bar wasn't 
> torqued down enough.  And also the passenger tierod/spindle connection 
> wasn't torqued all the way.  I also reseated and adjusted the upper 
> and lower steering column joints.  HUGE DIFFERENCE!!!!!  It drives 
> like a different car.  My squirely rear end is gone, my teeth 
> chattering rattle is gone as well.  There is still a bit of a 
> vibration at 60MPH, but after I get passed 65mph it goes away.  If 
> anyone has any ideas as to what the vibration might be, please let me 
> know.  I'm betting I need to take it to a place that can balance my 
> wheels properly.  Doesn't it need to be done on the car?  Last time i 
> know it was done OFF the car.
>
> Erik
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
    
  
  
    SPONSORED LINKS
  
       
  
  
  
  YAHOO! GROUPS LINKS
  
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN