[DMCForum] wheels shake update...again

[Erik Geerdink <dmcerik@xxxxxxxxx>]

Ok, so I went under the car and retorqued everything.  I also reseated the steering rack to make sure.  I did notice that the sway bar wasn't torqued down enough.  And also the passenger tierod/spindle connection wasn't torqued all the way.  I also reseated and adjusted the upper and lower steering column joints.  HUGE DIFFERENCE!!!!!  It drives like a different car.  My squirely rear end is gone, my teeth chattering rattle is gone as well.  There is still a bit of a vibration at 60MPH, but after I get passed 65mph it goes away.  If anyone has any ideas as to what the vibration might be, please let me know.  I'm betting I need to take it to a place that can balance my wheels properly.  Doesn't it need to be done on the car?  Last time i know it was done OFF the car.
 
Erik
 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Non-text portions of this message have been removed]

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---