Re: [DMCForum] Repair holes in cooling pipe?

[Josh Haldeman <jhaldeman@xxxxxxxx>]

I've got most of the cooling pipes available.  Some also have that 
pitting, but some are perfect.  All have been sandblasted.  If you're 
interested, let me know which one or ones you need, and I'll let you 
know what I have.  Asking 50% of retail, just like everything else.

-Josh

>
>
> At 12:15 AM 6/11/2005 +0000, you wrote:
> >I pulled out some of the radiator coolant piping today.  I removed all
> >of the aluminum tubing from the water pump to about where the fuel
> >accumulator is.  Some of the tubing is actually pitted in some areas
> >to the point where there's pinholes in it!  These areas were mainly at
> >the sections where the rubber joining hose ended.  That is:
> >
> >==aluminum=====|\\rubber\\|=====aluminum===
> >
> >Right where the |'s are, is where the pitting was the worst.
> >Is there any way to repair this?  I looked and saw the price of those
> >tubes is at least $30 each.  Some cost more.
> >
> >thanks,
> >
> >Matt
> >#1604
>
>
> [Non-text portions of this message have been removed]
>
>
> ------------------------------------------------------------------------
> Yahoo! Groups Links
>
>     * To visit your group on the web, go to:
>       http://groups.yahoo.com/group/DMCForum/
>        
>     * To unsubscribe from this group, send an email to:
>       DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>       <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
>        
>     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>


[Non-text portions of this message have been removed]

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.