[DMCForum] Re: Repair holes in cooling pipe?

["Matt Spittle" <mds328@xxxxxxx>]

Sweet, they are a bit cheaper on the NOS aren't they?  I had no idea.

Matt
#1604


--- In DMCForum@xxxxxxxxxxxxxxx, Chris Almy <chris.almy@xxxx> wrote:
> If you are looking for cheaper replacements, DPNW sells most of them
used. 
> I don't know what shape they are in, but I'm sure Toby will let you
know if 
> you ask. Their web site is here:
> http://www.delorean-parts.com/
> 
> Even the NOS stock they have is about 10% less then most other vendors 
> (assuming they have it).
> 
> Chris
> VIN 4099
> 
> At 12:15 AM 6/11/2005 +0000, you wrote:
> >I pulled out some of the radiator coolant piping today.  I removed all
> >of the aluminum tubing from the water pump to about where the fuel
> >accumulator is.  Some of the tubing is actually pitted in some areas
> >to the point where there's pinholes in it!  These areas were mainly at
> >the sections where the rubber joining hose ended.  That is:
> >
> >==aluminum=====|\\rubber\\|=====aluminum===
> >
> >Right where the |'s are, is where the pitting was the worst.
> >Is there any way to repair this?  I looked and saw the price of those
> >tubes is at least $30 each.  Some cost more.
> >
> >thanks,
> >
> >Matt
> >#1604
> 
> 
> [Non-text portions of this message have been removed]

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.