Re: [DMCForum] Clutch woes

[Marc Levy <malevy_nj@xxxxxxxxx>]

Initialy, the clutch would work with the "new"
thickness of the disk.  As it starts to slip, the
material would thin out quickly...  so the problem
would get worse in a non-linear maner.

If the problem is the flywheel not being cut properly,
in the next few days or so the car will not move at
all.


--- Ryan Wright <ryanpwright@xxxxxxxxx> wrote:
> One thought -- If the problem was the flywheel being
> cut flat, this
> should have slowly manifested itself. Since it
> didn't -- The problem
> just started suddenly -- I'm leaning toward
> something else going
> wrong.
>

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.