RE: [DMCForum] Re: locks left/right

["timnagin" <timnagin@xxxxxxxxxxxxxx>]

Dooooood... you have a floppy bellcrank ;)

Greg


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx]On
Behalf Of Andrew
Sent: Saturday, April 30, 2005 1:39 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] Re: locks left/right


On Sat, 30 Apr 2005, Toby Peterson wrote:

> In regards to the bell crank wiper switch issues ... on Winged1 I found 
> that the rivet that the crank pivots on was loose and allowed the bell 
> crank to flop around a bit.

I definitely have floppy bellcranks.  (I don't believe I've ever gotten to 
say that before.)  What exactly did you do to "redrive" the rivets?  I 
looked over the bellcranks when I had them out but didn't see any obvious 
way to tighten up the assembly.

-andrew

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.