[DMCForum] Re: Angle drive lubrication

["Joe OBrien" <joeyoseppijoe@xxxxxxxxx>]

I'm guessing you don't have one, but the new angle drives have a 
grease fitting on them. Just pop your grease gun on it and pump out 
the old grease every other oil change. I just remove the speedo 
cable, slather it in grease, and reinstall it.

I recommend delorean-parts' teflon lower speedo cable over the stock 
part, along with the newer style angle drive. Makes the speedometer 
almost bulletproof and easy to service.

Joe




--- In DMCForum@xxxxxxxxxxxxxxx, "lakelanier20" <derek4567@xxxx> 
wrote:
> 
> Is it possible to lubricate the angle drive without removing the 
> left-front wheel?  Like if you turn it all the way to the right or 
> something?  I have a feeling mine is about to break, because there 
> have been increasing stuttering/clicking noises from behind the 
> gauges accompanied by twitches in the speedo needle and vibrations 
> under my left foot (resting on the "dead pedal").  Also, what 
> lubricant do you guys squeeze in there?  I've read to use 
something 
> of "heavy weight."
> 
> Thanks,
> -Derek L

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.