Re: [DMCForum] Water pump replacement progress...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DMCForum] Water pump replacement progress...
- From: DMCVIN6683 <dmcvin6683@xxxxxxxxx>
- Date: Sat, 16 Oct 2004 11:57:13 -0500
Just order a new hex head drain plug from John Hervey and throw out
that stupid old drain plug and be done with it.
Mark V
On Saturday, October 16, 2004, at 12:36 AM, mw98gt wrote:
>
>
> I am moving along steady. I am hoping to get it all back together
> tomorrow- if the parts I ordered from John Hervey arrive.
> Installing the silicone hose for the heater hose is a major PITA.
> Those nipples are huge! It took like 10 methods and over an hour to
> get it on finally. I ended up doing what I origianlly should have,
> remove the pipe and get it mated up outside the engine bay.
>
> I am going to head out in the morning and buy a torque wrench, I
> should have initially. I dont want to overtighten anything. If I
> find out that I have already overtightened the y-pipe bolts should I
> loosen and then torque it correctly or does it not matter once it is
> already overtorqued and nothing bad happened?
>
> The o-ring kit I bought has one for the cold start injector tube
> where it connects to the manifold, should I replace that or not
> bother?
>
> I ordered new bearings from John hervey for the idler pullies. I
> have never changed out bearings and was wondering if I need
> anythings special to do it or any tips that I might need?
>
> Walt, what was the method you told me for putting new coolant in? I
> drained at the motor so I am unsure how much I should need, but what
> were you tellin me you do?
>
> Finally, I would like to order that bit from snap-on. The drain
> plug bit. How do I describe it to them. Is there a name for it so
> they know eactly what I am referring to?
>
> Misha
> #5197
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN