[DMCForum] Re: wx stripping adhesive

["Joe OBrien" <joeyoseppijoe@xxxxxxxxx>]

You can use 3M adhesive, but I still prefer to use black RTV 
sealant. Applied in a zig zag pattern, and after applied to the 
sill, it holds nicely. Just takes a few hours to cure properly. But, 
to each his own, just choose which method you like.

Later,

Joe


--- In DMCForum@xxxxxxxxxxxxxxx, "Lauren" <LPLand@xxxx> wrote:
> I noticed today that the weather stripping seal around my driver's 
> door is loose at the  bottom  -- what is the recommended 
adhesive?  
> I noticed, too, that it has holes that look like it should be 
screwed 
> down but I can't find corresponding holes in the door frame - am I 
> overlooking something? 
> 
> I know this was a recent thread, but you are such a collective 
> fountain of info, I can only absorb so much at once.  
> 
> Thanks any help............................LP

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.