Re: [DMCForum] Major door problem

[DMCVIN6683 <dmcvin6683@xxxxxxxxx>]

Always go to the maker of the device first because that is your best 
help.

Good luck.

Mark V






On Monday, August 16, 2004, at 02:12  PM, mw98gt wrote:

> I was installing the delorean northwest door actuator upgrade and
> wings aloft kit.  First I installed the door actuators.  They warn
> you to make the doors think they are closed by manually closing the
> latches so you dont damage something.  I followed it and all went
> fine.  They worked great.  Then I installed the wings aloft kit with
> alarm.  Everything went fine, during the install I had to close to
> doors so I unlatched them.  At the very end, I accidentally test the
> lock unlock feature with the doors open and unlatched.  Now I think
> that caused a problem because the actuators can no longer unlock the
> doors all the way.  It gets halfway and then there is too much
> resistance from the front latch and it requires human force to pull
> it all the way to unlock the door.  Does anyone know what I might
> have hurt and how I can fix it?
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.