Re: [DMCForum] Air system/mode switch question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DMCForum] Air system/mode switch question
- From: "Walter Coe" <Whalt@xxxxxxx>
- Date: Sun, 8 Aug 2004 21:13:34 -0400
Brian,
The a/c has several vacuum-actuated flapper doors, and it
sounds like the one for your dash & door vents is not
opening.
There are a couple of things that can cause this. First
determine if it is a vacuum problem. Does the mode switch
hiss? Do you hear the various flapper doors open & close
when you turn the mode switch thru its full range? Put the
blower speed to "0" so you can hear better. Momentary air
noises are normal. But a constant hiss from the mode switch
is a leak. Did you hear the doors move? If not then either
the mode switch is broken or a vacuum line is phuct. If you
did hear them move (which means that at least some of the
actuators are getting vacuum) then most likely you have a
broken vacuum actuator that controls the dash vents. The
arm on it is made of plastic, and they are known to break.
Exact replacements are very expensive. I would make a new
arm first.
Let us know what you find.
Walt Tampa, Florida
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN