Re: [DMCForum] Re: PRV Dwell Angle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DMCForum] Re: PRV Dwell Angle
- From: Martin Gutkowski - DMUK <martin@xxxxxxxxxxxxxx>
- Date: Thu, 05 Aug 2004 17:10:20 +0100
Been there, done it, The output is very low current but a scope will
have no problems with it - but the signal itself is very dirty.
Martin
content22207 wrote:
> If PRV "pulse coil" is anything like a standard hall effect sensor, I
> see no reason why you couldn't attach an oscilloscope. Are you sure
> the manual doesn't state that dwell angle can't be ADJUSTED?
>
> An analog volt meter can measure voltage through the sensor even with
> wave forms (yet another example of older technology triumphing over
> its successor).
>
> Bill Robertson
> #5939
>
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN