Re: [DMCForum] Tail-light circuit boards - soldering ok?

[DMCVIN6683 <dmcvin6683@xxxxxxxxx>]

I dont see any problem in doing this. All you are doing is making the 
contact better.

Mark V


On Wednesday, August 4, 2004, at 12:32  PM, lakelanier20 wrote:

> Hi everyone,
>    I guess most people know about the "tempermental connectivity" fix
> of installing the Radio Shack machine screws and nuts through the
> rivets and tightening them down.  But I was wondering, is it ok to
> just put a drop of solder next to each of the rivets?  (so that half
> the drop touches the base of the socket, and the other half touches
> the metal surface of the circuit board).  Has anyone done this?  I
> would like to solder rather than put in the screws and nuts, but
> thought I'd ask all the experienced folk first if there are any
> problems with doing so.
>
> Thanks,
> -Derek L.
> VIN 5302
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.