RE: [DMCForum] More ignition analysis (ON TOPIC)

["Scott Mueller" <scott.a.mueller@xxxxxxxxx>]

Rich,

At idle I measured 7V between the negative post on the coil and ground.

When I revved the engine I measured 9V between the negative post on the coil
and ground

Scott Mueller 002981


-----Original Message-----
From: cruznmd [mailto:racuti1@xxxxxxxxxxxx] 
Sent: Tuesday, August 03, 2004 4:36 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] More ignition analysis (ON TOPIC)


I was concerned that this post might be lost among the debate.

What is the MAX input voltage the coil should receive? In a DeLorean 
context please, no Lincolns or Mercuries. I'm not seeing it in the 
manual.

When the engine is at idle and hot, I'm getting 8.5 volts now, and 
when revved -slightly- it makes up to 10.8 Vdc. If anyone here can 
tear themselves away from CSPAN or F/911 for ten friggin' minutes to 
take some comparison readings, or email me some electrical values, 
I'd be very grateful.

Rich A.
#5335




 
Yahoo! Groups Links

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.