RE: [DMCForum] Re: Dave Stragand's HP

["Dave Stragand" <dave.stragand@xxxxxxxxxxxxxxx>]

Oh no!  The hp vs torque argument again!!!  =)
 
If the block is built up strong enough, with about 7:1 compression and 14
psi of boost through free-flowing manifolds and heads, well, there should be
oodles of oomph from 2000 up.
 
-Dave

-----Original Message-----
From: content22207 [mailto:brobertson@xxxxxxxxxxxx] 
Sent: Thursday, July 22, 2004 11:38 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Re: Dave Stragand's HP


Don't fall into the Horsepower trap. 200 HP in the mid 2000 RPM range
outperforms 300 HP in the upper 3000's or lower 4000's.

PRV is too small to produce those numbers (NA) without really winding
up, but they're pretty standard for bone stock late model big blocks.

We've had this discussion before...

Bill Robertson
#5939



[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

	I'm a Man Woman seeking a Man Woman City or Zip:

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.