[DMCForum] Re: Rich: Your tach flicker

["cruznmd" <racuti1@xxxxxxxxxxxx>]

The tach would "flicker" upwards of 3-500 RPM's at idle and if you 
pushed the pedal past the "stutter point" is would jump 400 RPM's and 
stay there until you let off of the pedal.

The tach is rock-solid since I replaced the wire.


--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote:
> Can you describe this to be? Does the tach jump erratically?
> 
> I had a problem that I referred to as a "wacky tach." It would jump 
and
> sometimes spin all the way around. It turned out to be a loose 
connection in
> the back of the instrument cluster. It would come loose and then 
make a
> connection causing the tach to jump and spin.

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.