Re: [DMCForum] Hot Start

[Samuel <samuel_yahoo@xxxxxxxxxxxxx>]

It is possible, I have not taken that connection apart yet. I would 
still like to know which area of the system I pressure tested so I can 
identify if the pressure is falling thru that portion of the system. If 
I measured the primary, then it seems to be holding proper from what I 
read in the manual (minimum 1.7 bar after 10 minutes sitting). If I 
didnt measure primary, then do all I have to do is turn my tester around 
to measure primary?

Samuel

jmpdmc7878 wrote:

>Samuel,
>
>Could this be the problem?   http://www.specialtauto.com/delorean-
>images/Prim-press-regulator-1.jpg   Especially if someone messed 
>with the distributor, this link to John's site could be the answer.  
>Sorry I can't comment on your fuel pressure readings.  Hope you find 
>a solution.
>
>                     
>                                             Jeff Porter
>                                               01678
>
>
>
> 
>Yahoo! Groups Links
>
>
>
> 
>
>
>
>
>  
>

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.