Cap and rotor were replaced a month or two ago. Wires I have to order. I'm thinking of John's new-fangled super-low resistance wires. ;-) --- In DMCForum@xxxxxxxxxxxxxxx, "content22207" <brobertson@xxxx> wrote: > Jeg's describes Accel Superstock @ 45,000 volts. You'll notice biggest > difference this winter. > > Didn't realize until recently that 20% of combustion chamber temp is > absorbed by spark plug insulator. That's why I'm leery of the Bosch > HR9's currently in my block (purchased under advice of parts house > "technician"). Will try them to Fall Foliage but am taking some good > old Delco R44's just in case. > > I think rule of thumb is: if plug isn't fouling, keep it cool. > > What did you do about cap/rotor/wires? > > Bill Robertson > #5939 > > >--- In DMCForum@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote: > > Ok... > > > > I installed an Accel superstock coil. I get aggravated when the guys > > behind the counter can't tell me how many volts a particular model > > puts out. Either way, it has to be better than what I had. > > > > I visited 4 parts houses today. These guys just suck. People either > > didn't have the plugs I was looking for or they didn't have them in > > the quantity I needed. How can Napa only have 3 of anything??? > > Anyway... > > > > Huh..Napa tried to push another set of Champions on me but most folks > > here told me to steer clear of them. I ended up with a set of NGK's > > that are one heat range higher than stock. > > > > The result? It -seemed- to help. I launched myself out of my driveway > > as hard as I could and zipped down the street. Like I said > > though...it could be psycho-somatic. I really need to ride in a > > properly tuned, stock DeLorean to see how close I am. > > > > Riddle me this guys: For those of you with manual trannies, at what > > RPM do you typically shift at and roughly how long does it take you > > to get there? That might help me determine if I'm close. > > > > Thanks, > > > > Rich Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=259538.4000197.5214659.1261774/D=egroupweb/S=170512 6215:HM/A=1750876/R=0/SIG=11v1mrq3u/*http://hits.411web.com/cgi-bin/hit?pa ge=1762-1062629109228440> click here <http://us.adserver.yahoo.com/l?M=259538.4000197.5214659.1261774/D=egroupm ail/S=:HM/A=1750876/rand=245293949> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN