Scott is correct but did not answer your question.. the pumps is in the boot, the boot is inside and the boot lip is outside the tank. The fuel pump wires go in the two grooves in the boot. THEN, the outer boot, which covers the pump, goes over the inner boot. A very large hose clamp goes around the outer boot to hold it all together. The hose clamp must be low enough to hold the inner boot onto the tank flange, but high enough so that it doesn't slip off the bottom of the outer boot. The fuel pump wires are protected from the hose clamp by the grooves in the inner boot and the outer boot. yea. Jim FYI, to our english friends, the inner and outer boots are in the boot. On Thu, 11 Sep 2003 18:11:29 -0000 "cruznmd" <racuti1@xxxxxxxxxxxx> writes: > Ok guys.... > > What the hell is supposed to hold the fuel pump to the tank? > > In other words, My pump is in the rubber boot but what holds the > boot > to the tank? Am I supposed to flip the rubber lip up and clamp it > and > flip the lip down over the clamp or what? > > I've been a rolling bomb all this time and didn't even know it. > > Thanks, > > Rich > > > ------------------------ Yahoo! Groups Sponsor > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > ________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today! ------------------------ Yahoo! Groups Sponsor ---------------------~--> Yahoo! Autos. Everything you need to know about buying or selling a car. FREE Quotes, 360° Tours, Research, Blue Book, Compare Vehicles, Buy Used http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN