Agh! You're supposed to say: "Travis, there's a special 2 dollar tool that will make your job so easy, that you will do it and then it will hop off the tool and call you a hooker." I guess the bumper has gotta come loose. > -----Original Message----- > From: Martin Gutkowski [mailto:webmaster@xxxxxxxxxxxxxx] > Sent: Tuesday, August 12, 2003 3:14 PM > To: DMCForum@xxxxxxxxxxxxxxx > Subject: Re: [DMCForum] Tell me you didn't have to take the bumper off > > If your fascia is in okay condition, you should be able to take the row > of nuts off along the bottom and remove that metal heatshield which > mounts to the rear chassis crossmember. The fascia shuold flex up out of > the way. But taking it off is a lot easier for the job full stop > > Martin > > Travis Goodwin wrote: > > >...to get an impact socket on the crankshaft pulley. > > > >The wrench I have won't fit in there without taking the bumper off, which > I > >am dead set against at the moment. I tried a breaker bar with not luck. > If I > >got that route, I need something to lock the engine down. I fear that > >sticking something on the flywheel to lock it into place will damage it > >(anything other than the stupid "special tool"). > > > >Any advice? > > > > > > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=244522.3656190.4921519.1261774/D=egroupweb/S=170512 6215:HM/A=1595054/R=0/SIG=1246b0b92/*http://ashnin.com/clk/muryutaitakenat togyo?YH=3656190&yhad=1595054> Click Here! <http://us.adserver.yahoo.com/l?M=244522.3656190.4921519.1261774/D=egroupm ail/S=:HM/A=1595054/rand=570193365> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN