Actually, we're not drowning up here. The weather is always crappy, cloudy, threatening looking and it does rain but it's not a constant downpour. I get maybe one brief rain per day, usually in the late evening. It's always dry when I go to work on it. As far as how to get out of my parking spot, I'm going to fix the linkage (today I hope). --- In DMCForum@xxxxxxxxxxxxxxx, "content22207" <brobertson@xxxx> wrote: > Check out item #90186A211 at http://www.mcmaster.com . Very close to > what my fascia's got (different thread pattern). At least you wouldn't > have any trouble finding stainless hardware to replace factory screws. > > Just how do you plan to back out of your new parking place? > > Forget the spiders (I've got them too) -- how are you working in this > miserable weather? Am about to float away down here. Saw on the news > that Sanford NC *DID* float away. Perhaps that's why Louie G is MIA. > > Don't get overly optomistic Re: vacuum leaks. Am convinced truly tight > PRV doesn't really exist. Is like painting a house -- by the time you > finally plug the last one is time to go back and reseal your first. > > Bill Robertson > #5939 > > >--- In DMCForum@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote: > > > > Ok, on to business. Many of the metal fittings in my rear fascia for > > holding on such minor things as my TAIL LIGHTS and TAGS have rusted > > and ripped out. I don't think I had rivnuts. I had little square > > doodads with a threaded hole for the screw. Is that a rivnut? What are > > my options for repair? > > > > On the upshot, the car was running so well I took a quick putt around > > the parking lot to rip up the spider webs. It steers and brakes well > > so far. Won't the neighbors trip when they see it parked nose in! > > > > Fraggin' spiders..... > > > > Stuck in 1st gear, > > > > Rich Yahoo! Groups Sponsor <http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512 6215:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autore dir?camp=556&lineid=3614674?=egroupweb&pos=HM> <http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm ail/S=:HM/A=1524963/rand=903418371> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN