Check out item #90186A211 at http://www.mcmaster.com . Very close to what my fascia's got (different thread pattern). At least you wouldn't have any trouble finding stainless hardware to replace factory screws. Just how do you plan to back out of your new parking place? Forget the spiders (I've got them too) -- how are you working in this miserable weather? Am about to float away down here. Saw on the news that Sanford NC *DID* float away. Perhaps that's why Louie G is MIA. Don't get overly optomistic Re: vacuum leaks. Am convinced truly tight PRV doesn't really exist. Is like painting a house -- by the time you finally plug the last one is time to go back and reseal your first. Bill Robertson #5939 >--- In DMCForum@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote: > > Ok, on to business. Many of the metal fittings in my rear fascia for > holding on such minor things as my TAIL LIGHTS and TAGS have rusted > and ripped out. I don't think I had rivnuts. I had little square > doodads with a threaded hole for the screw. Is that a rivnut? What are > my options for repair? > > On the upshot, the car was running so well I took a quick putt around > the parking lot to rip up the spider webs. It steers and brakes well > so far. Won't the neighbors trip when they see it parked nose in! > > Fraggin' spiders..... > > Stuck in 1st gear, > > Rich Yahoo! Groups Sponsor <http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512 6215:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autore dir?camp=556&lineid=3614674?=egroupweb&pos=HM> <http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm ail/S=:HM/A=1524963/rand=917435117> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>