RE: [DMCForum] Torque question

["Travis Goodwin" <tgoodwin@xxxxxxxxxxxx>]

Thanks to you guys I'm armed to the teeth. I am still coating the bolts
have
my little propane torch that I plan to use lovingly on them to get the to
wiggle free.

Since there are no definitive torque settings for the bolts, I will just
use
good ole common sense. 

The package I bought was the PJ Grady kit that comes with all new
hardware,
so if everything comes out ok the new stuff will replace it.

I will be documenting this procedure for future generations.

> -----Original Message-----
> From: John Hervey [mailto:john@xxxxxxxxxxxxxxxx]
> Sent: Thursday, June 26, 2003 7:10 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: RE: [DMCForum] Torque question
> 
> Travis, The chemical is good and there may be other opinions as to take
> out
> the manifold bolts, But heat will play a big role in expansion. It took
me
> almost one hour and a propane torch which is not the hottest but ok to
get
> a
> stud out of a starter. I know heat would make it harder to work on, but
it
> will expand and loosen up quicker.
> John Hervey
> 




Yahoo! Groups Sponsor	 
 
<http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512
6215:HM/A=1564416/R=0/SIG=11ti81skc/*http://www.netflix.com/Default?mqso=6
0164797&partid=3170658> 	 
 
<http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm
ail/S=:HM/A=1564416/rand=378929693> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>