Re: [DMCForum] Idle speed sensor

["id" <ionicdesign@xxxxxxxxxx>]

Do i put the contacts on both terminals, one at a time with one grounded
or what part do i connect them to when i test it? I do have a Tester but
i dont know how to test this part.

Mark



Martin Gutkowski wrote:

>  Mark - with an ohm-meter, what do the terminals say when cold? If the
>
> device has failed and goes open-circuit, the engine will idle at
> 2000rpm. Go and buy a cheap digital multi-meter to check the
> resistance
> on it
>
> Martin
>
> id wrote:
>
> >Ok i have one sensor to test and i dont know how so i am asking for
> help
> >again. Part #102480 Idle Speed Thermister or also known as Constant
> Idle
> >Switch Thermister. This switch has 2 connection tabs on it. I hooked
> up a
> >tester and ran it uneder hot and cold water and it didnt seem to do
> >anything, i was checking to see if it made a contact under hot and
> cold
> >water like the Lambda sensor does.
> >
> >Anyone please help me with this so i can enjoy the summer driving my
> car.
> >
> >I am not electrical smart, i am electricly challenged so i need easy
> >instructions to test this sensor.
> >
> >Thanks
> >Mark


[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor	 


 
<http://rd.yahoo.com/M=247865.3269369.4566997.1261774/D=egroupweb/S=170512
6215:HM/A=1482387/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1053304751%3e
M=247865.3269369.4566997.1261774/D=egroupweb/S=1705126215:HM/A=1482387/R=1
=1053304751%3eM=247865.3269369.4566997.1261774/D=egroupweb/S=1705126215:HM
/A=1482387/R=2> 	
 
<http://us.adserver.yahoo.com/l?M=247865.3269369.4566997.1261774/D=egroupm
ail/S=:HM/A=1482387/rand=631773738> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>