Re: [DMCForum] Hey Martin! TABs & washers

["Andrei Cular" <acular@xxxxxxxxxxxxxxx>]

Dave

Ithink what Walt is concerned about is how the OEM washers show signs of
indentation or wear from rotating.

Does anyone know what grade the OEM washers are?


Andrei



----- Original Message -----
From: "Stragand, Dave" <dave.stragand@xxxxxxxxxxx>
To: <DMCForum@xxxxxxxxxxxxxxx>
Sent: Thursday, March 20, 2003 4:00 PM
Subject: RE: [DMCForum] Hey Martin! TABs & washers


Stainless washers at the hardware store:  $0.30 each. =)

There is no sheer force on a washer... So you don't have to spec a
material
based on that.  There is only going to be a compressive force, and
anything
that doesn't compress will do fine.

Before you go to this expense though, Walt, do you have any actual market
for these?  They make a batch of Toby-Tabs when the demand builds up, and
it
isn't that often.  Are you sure you want to spend money to enter a
low-demand niche market, which already has a sufficient product to fill
the
need?  It's your dough, but you may want to think about it before you get
stuck with a product that doesn't move very fast.

-Dave



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Your own Online Store Selling our Overstock.
http://us.click.yahoo.com/rZll0B/4ftFAA/46VHAA/HliolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

<<attachment: winmail.dat>>