Antari makes a water-base residue-free fog juice. http://www.everestlightingeffects.com/fogfluidhals.html CO2 was an idea but it would be dangerous over the engine bay and impossible to control. This would be ideal if the car were stationary, but I will need to activate the fog while I'm driving. If I do get stuck with a residue, my research indicates the majority of the residue will accumulate where the fogger is sitting, so I'm okay with that. And if I accelerate the fog out and away from the car, hopefully I can cut down how much can actually settle on the car. My setup has been purchased. I got a fogger that spit 3000 cubic feet per minute, a wireless remote control, and a 750W DC/AC inverter. Once everything is together, I will test it to see if this configuration will work. > -----Original Message----- > From: deloreanfl [mailto:ericp@xxxxxxxxxxxxxxx] > Sent: Friday, August 16, 2002 10:47 PM > To: DMCForum@xxxxxxxxxxxxxxx > Subject: [DMCForum] Re: To all the electrical gurus > > Travis, > I love the project idea. Normally, I'd call myself an electrical > guru, but this time I'm going to comment on the fog. > > Chemical fog (fog juice, as it's often called) is composed of a > mineral oil base. I'm sure you know already, it produces the fog by > heating up a "plate" then sparying this juice onto it. It vaporizes > the juice and creates "fog". This leaves a herendous residue behind. > (Take a close look at your local dance club - if they have mirrors > and a fog machine...you'll see the film! Would you want this in or > on your car? > > I know it sounds exotic, and maybe it's a little impracticle - but > have you considered dry-ice (frozen Carbon Dioxide)? You wouldn't > need such a powerful heater, and the fog has a tendancy to actually > roll and fall (as it is actually colder) rather than fill (like > smoke - as the chemical fog machines do). And it leaves no residue. > It doesn't last very long, but it isn't very expensive. > > Hey - thats my two cents. But your project sounds like fun! > ------------------------ Yahoo! Groups Sponsor ---------------------~--> 4 DVDs Free +s&p Join Now http://us.click.yahoo.com/pt6YBB/NXiEAA/Ey.GAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN