Travis, I love the project idea. Normally, I'd call myself an electrical guru, but this time I'm going to comment on the fog. Chemical fog (fog juice, as it's often called) is composed of a mineral oil base. I'm sure you know already, it produces the fog by heating up a "plate" then sparying this juice onto it. It vaporizes the juice and creates "fog". This leaves a herendous residue behind. (Take a close look at your local dance club - if they have mirrors and a fog machine...you'll see the film! Would you want this in or on your car? I know it sounds exotic, and maybe it's a little impracticle - but have you considered dry-ice (frozen Carbon Dioxide)? You wouldn't need such a powerful heater, and the fog has a tendancy to actually roll and fall (as it is actually colder) rather than fill (like smoke - as the chemical fog machines do). And it leaves no residue. It doesn't last very long, but it isn't very expensive. Hey - thats my two cents. But your project sounds like fun! --- In DMCForum@xxxx, Travis Goodwin <tgoodwin@xxxx> wrote: > My plan so far is hatching nicely... I am gonna have to fudge it but my > conversion will work. > > The majority of the rear will consist of a fogger that feeds an area under > Mr Fusion which pipes the fog to the vents via a dryer vent hose. I plan to > use a small fan to accelerate the fog to the vents. > > I will use a DC/AC power inverter for the power supply. It's gotta be a > hefty one, 500-700W. Can anyone foresee a problem using this? ------------------------ Yahoo! Groups Sponsor ---------------------~--> 4 DVDs Free +s&p Join Now http://us.click.yahoo.com/pt6YBB/NXiEAA/Ey.GAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN