[doc] Re: plunger in fuel distributer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[doc] Re: plunger in fuel distributer
- From: "blackaddertoo" <blackaddertoo@xxxxxxxxxxx>
- Date: Thu, 03 Nov 2005 20:44:21 -0000
hi
thanx for the reply.
no there is no petrol in the venturi but looks pretty dirty.
i have not got my engine to run ok more than 1 minute since i bought
her over from the US.
after 30 secs chugs and dies.
restarts ok then does same.
so am now doing the valley, plugs, rotor, cap, coolant pipe, y pipe
sensors, water pump, replace all o rings, clean venturi,
electroplate all brackets/bolts etc..
anyhting else while i have 5 minutes??.
also new petrol filter (did it 6 months ago but want to eliminate a
problem for the sake of 10 quid)
Regards
Steve
--- In doc-uk@xxxxxxxxxxxxxxx, "Mike Bosworth" <mike.bosworth@xxxx>
wrote:
>
> Steve
>
> It shouldnt be a 'very tight fit', if you hold the distributor up
in
> the air and push the plunger fully in and then let go, this should
> plop out of the bottom 'quite' quickly with a little friction. The
> seal on this part is through metal to metal contact.
>
> There should be no petrol in the air venturi, check out the link i
> posted for its operation. Your not saying yours has :)?
>
> Kind Regards
>
> Mike
> #2001/403
>
> --- In doc-uk@xxxxxxxxxxxxxxx, "blackaddertoo"
<blackaddertoo@xxxx>
> wrote:
> >
> > hi
> >
> > when i say did not come out immediately, just meant it was a
very
> > tight fit.
> > looks clean though.
> >
> > is the cavity under in the air venturi full of petrol when
running-
> i
> > assume not?.
> >
> > Regards
> >
> > Steve
> >
> >
> >
> > --- In doc-uk@xxxxxxxxxxxxxxx, DANIEL SHANE <daniel.shane@xxxx>
> > wrote:
> > >
> > > Adding onto Mikes words, each metering head and
> > > plunger are matched, you cant take a plunger from one
> > > head and put it in the other. These things are
> > > precision made.
> > >
> > > Try soaking it in acetone as it should not be
> > > sticking. If that fails you may need to get it
> > > rebuilt.
> > >
> > > Dan
> > >
> > > DMC Ltd.
> > >
> > >
> > >
> > > --- Mike Bosworth <mike.bosworth@xxxx>
> > > wrote:
> > >
> > >
> > > ---------------------------------
> > > --- In doc-uk@xxxxxxxxxxxxxxx, "blackaddertoo"
> > > <blackaddertoo@xxxx>
> > > wrote:
> > >
> > >
> > > > the plunger did not come out immediately so does
> > > this mean it was
> > > > sticking or is this normal.
> > >
> > >
> > > At rest the 'plunger'is weighted should move freely
> > > downwards by
> > > gravity, the 'arm' on the metering flap moves this
> > > plunger up, if yours
> > > is sticking then this needs to be resolved, it will
> > > effect your running
> > > if it is sticking in certain positions.
> > >
> > > On cleaning this up be careful not to score the
> > > surface of the plunger
> > > it is a very delicately machined thing.I've heard
> > > people use acetone to
> > > clean it up. Make sure the little o ring is in place
> > > on the underside
> > > of the distributer where it bolts back on to the top
> > > of the metering
> > > head.
> > >
> > > A fuel pressure tester is a good investment when you
> > > have fuel issues.
> > >
> > > Regards
> > >
> > > Mike
> > >
> > >
> > >
> > >
> > >
> > >
> > > DOC UK Website: www.deloreans.co.uk
> > > Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> > > ** Unless otherwise stated, all messages posted to the
> > > group are assumed public and may be printed in the
> > > club magazine **
> > >
> > >
> > >
> > > SPONSORED LINKS
> > >
> > > Recreation
> > > Automotive Sports
> > >
> > > Delorean part
> > > Delorean cadillac
> > >
> > >
> > > ---------------------------------
> > > YAHOO! GROUPS LINKS
> > >
> > >
> > > Visit your group "doc-uk" on the web.
> > >
> > > To unsubscribe from this group, send an email to:
> > > doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo!
> > > Terms of Service.
> > >
> > >
> > > ---------------------------------
> > >
> >
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
YAHOO! GROUPS LINKS
Back to the Home of PROJECT VIXEN