Re: [doc] Re : Steering Bush
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] Re : Steering Bush



Glad to hear you got it done ok, bit worrying about the pinch bolt though.

Dave.
----- Original Message -----
From: "Kevins Work" <kevin.milliken@xxxx>
To: <doc-uk@xxxxxxxxxxxxxxx>
Sent: Friday, February 14, 2003 1:47 PM
Subject: [doc] Re : Steering Bush


> Hi
>
> Just to update those people that gave me advice on fitting the steering
bush
> that Martin got for me.
>
> Started last night about 4.30 and finished at 6.30 with just the knee pads
> to fit all went quite well without any major problems.
>
> Except, I am very glad that I did change it as during the process I
> discovered that the pinch bolt on the lower steering shaft had never been
> tightened. The shaft was just floating around on the splines held on by a
> wing and a prayer.
>
> I had driven the car back from Birmingham 150 miles with the steering like
> this!!! and could have lost the steering completely on turning the wheel
to
> hard. I will now be checking all steering and wheel components before it
> goes on the road again.
>
> Kevin
>
>
>
>
>
>
> DOC UK Website: www.delorean.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated