[doc] Wet Engine

[Daniel Shane <daniel.shane@xxxxxxxxxxxxxx>]

Hi All

Whilst replacing the Cap and Rotor on 4754 I dropped one of the copper
washers from the fuel system.  Whilst looking for it I noticed what looked
like anti freeze under the intake manifold.

I removed the intake manifold and it looks like I have a water leak.  I've
uploaded 2 pictures to the group into the pictures section in an album
called 4754.

It looks like the water pipe that feeds the pump is ok, I've run my hand
along it and no rust but the photo of the back of the pump looks bad.

Other than the pump is there anything else I should look at for leaks ??

Dan Shane
DOC 423
VIN 4754

PS if your read this Martin I wouldn't mind a set of the copper washers for
the fuel unit if you have them.




DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/doc-uk/
   
• To unsubscribe from this group, send an email to:
  doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.