Re: [doc] Head gasket

["nick12dmc" <Tammyfew@xxxxxxx>]

Thanks Martin, 
I have bought a compressor and a 36mm impact socket, impact wrench
I can borrow from work.
I will strip her down, change the chains etc.
Might as well do it right.
May need some more advice when it comes to setting the timing and
putting it back together.

Regards
Nick H
Mem 164 

--- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
> It really is worth investing n a compressor..... But we did get one 
off 
> using a breaker bar, lots of penetrating oil, a bit of heat and 
someone 
> standing on the brakes while in 5th.
> 
> You must bolt the heads back down.
> 
> Our compressor is actually in Baldock at the moment, you're welcome 
t 
> oborrow it (it's a little thing). I was dismantling my 25 turbo 
engine 
> in my mate's garage and needed it for getting the crankshaft nut 
off!
> 
> Martin
> 
> nick12dmc wrote:
> 
> > Martin,
> > The only thing that put me off removing the cover was the 36mm nut
> > how do you lock the engine to undo it if you don't have air tools?
> > as I understand if you try and turn it with a loose head it
> > will push the liners out in the lower engine
> > Regards
> > Nick



DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/doc-uk/
   
• To unsubscribe from this group, send an email to:
  doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.