My blower motor (under the dashboard - Heat and A/C fan) will not stay on , on speeds 3 and 4. My car has recently come out of a 20 year hibernation. If I turn the fan on speeds 1 or 2, it works perfectly. If I select 3 or 4 however, it only runs for a minute or two then quits. I can turn it to 1 or 2, and it works fine. A few minutes later, I can turn it back to 3 or 4, and the fan blows again for a few minutes, then shuts down again. If I leave the fan on in position 3 or 4, it will quit after a few minutes, but then a few minutes, come back on. I replaced both the Speed 3 and the Speed 4 relays, no change. Seems like some sort of thermal cutout is happening, but where? Doogie ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: dmcnews-digest@xxxxxxxxxxxxxxx dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/