On the starter relay, check you get 12v across the two side pins when you switch the key to crank. With the aid of a jump wire, connect the top and bottom terminals and see if the starter cranks. One of these will not work and you'll know where to start looking. It's usually the bulkhead connection under the coil cover not passing power to the solenoid Best Wishes, Martin Sent from my BlackBerry® -----Original Message----- From: Farrar Hudkins <fhudkins@xxxxxxxxx> Sender: dmcnews@xxxxxxxxxxxxxxx Date: Thu, 10 May 2012 09:49:16 To: <dmcnews@xxxxxxxxxxxxxxx> Reply-To: dmcnews@xxxxxxxxxxxxxxx Subject: [DML] no start from key Hey, gang. I can't start the engine with the key anymore. This was an intermittent problem which has now become consistent, so it's now time to fix it. I have verified that the Neutral Safety Switch is functioning correctly and has good contacts. I have verified that the Start Inhibit Relay is functioning correctly and has good contacts. I have verified that the Start Inhibit Relay socket wiring mod mentioned in the TSB has been done correctly. When I turn the key to "On" and jump the starter motor directly, the engine starts every time. I have a voltmeter and a test light. Where should I check next? Thanks, Farrar Hudkins #2613 -- Sent from my laser-guided nuclear-powered refrigerator, operated by its crew of hyperintelligent pandimensional cyborg kittens, controlled remotely via telekinetic sonic screwdriver. ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: dmcnews-digest@xxxxxxxxxxxxxxx dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/