[DML] Re: Hazard lights switch

["Welmoed" <welmoedj@xxxxxxxxx>]

--- In dmcnews@xxxxxxxxxxxxxxx, "rgalichon" <rgalichon@...> wrote:
>
> --- In dmcnews@xxxxxxxxxxxxxxx, "Welmoed" <welmoedj@> wrote:
> > Not complicated at all: remove the push button's cap and blue screen beneath it.  Put in whatever you're going to use: buld or LED (I propose using a LED - less heat). In the latter case however you will need to modify the LED's contact legs. One of each need to be cut a little less than halfway (keeping the fixed contact end).
> > Otherwise you keep blowing fuses!  Welmoed.
> 
> Thanks, Welmoed.  I ordered a red Hazard Light LED.  
> 
> Does the Hazard push button cap unscrew counterclockwise from the dashboard or do I just pull it straight out?  (I'm trying to avoid breaking it).  :)  Thanks again.
>
The cap is just a straight pull up.
The blue lense beneath it is not glued, if you can't get it off with your fingers, use the point of a sharp knife to lift it.
For extracting the bulb you will need a needle nose pliers.
That "cutting halfway" for a LED means at the lowest point of the wedge, for your info.

Welmoed.



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/