--- In dmcnews@xxxxxxxxxxxxxxx, "Welmoed" <welmoedj@...> wrote: > Not complicated at all: remove the push button's cap and blue screen beneath it. Put in whatever you're going to use: buld or LED (I propose using a LED - less heat). In the latter case however you will need to modify the LED's contact legs. One of each need to be cut a little less than halfway (keeping the fixed contact end). > Otherwise you keep blowing fuses! Welmoed. Thanks, Welmoed. I ordered a red Hazard Light LED. Does the Hazard push button cap unscrew counterclockwise from the dashboard or do I just pull it straight out? (I'm trying to avoid breaking it). :) Thanks again. ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/