Well, it's probably not original based on the hammer marks, but it's not that new either. Smiths angle drives haven't been available "new" for several years, though it's possible it was a rebuilt unit, and they were sold from time to time over the years, too. James --- In dmcnews@xxxxxxxxxxxxxxx, "henryohnstad" <henryohnstad@...> wrote: > > Hello > > I am in the process of replacing the angle drive. While I was working on this, I noticed that the previous owner may have replaced it before because of the hammer marks on the 36mm axle nut (they must not have had a socket) and that the old angle drive says "Smith's Motor Accessories." Is this a replacement angle drive from the past? > > Henry > 6063 > ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/