Group, Just in case you haven't seen my new valve cover gasket and air flow meter gasket well here they are: http://www.specialtauto.com/delorean-parts/engine.html I was tired of buying the standard thin hard paper in most cases gaskets and wondering if they were going to seal or not so I have made them. We made the gaskets from CS301 material which you can read about on the site. The valve cover are 0.32 thick which is normally twice as thick in most cases, and with the rubber base will compress when you tighten down. Remember with 7mm no more than 15 lb's of torque. The air flow meter gasket also made out of the same CS301 material and at the same thickness of .016 as to not throw off any tolorences. I am now shipping the new gaskets with all the kits. John Hervey www.deloreanautoparts.com www.specialtauto.com To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/