Tuna cans are made of aluminum -- rust is not an issue (I even used a stainless nut to hold mine down). Factory stud cast into the tank is carbon, however. Bill Robertson #5939 >--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@...> wrote: > > > IMHO a "tuna can" (a METAL can) is not a good idea. If any water > should get into the tank it goes right to the bottom, exactly where > that tuna can IS! That can will rust and fill the fuel system with > crud. About the worst thing you can do to a fuel injected system is > allow dirt (crud) to get in. Water is a close second because it > promotes the formation of crud. > David Teitelbaum > vin 10757 > To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/