Welmoed, Yes, I fully understand how the seat belt circuit works. I just can't figure out were the mate to the seat belt connector is located. If that part is not connected, the the buzzer logic box will not work, as advertised. I suspicion that the mate to the belt plug is actually a plug that changes the colors from red and black to two completely different colors. (Not unheard of in English electrics) That plug has got to be within 18 inches of the seat belt wires, since that is how long, physically, the wires are that extend from the belt. My best bet is that it located under the console, but after spending 7 hours installing it yesterday, I really didn't want to take it out again. Hence, I was hoping for someone who knew where or could see the plug on their car. That way I might be able to fish for it and not have to do an uninstall, followed by another lengthy install. Thanks. Mike TPS 1630 --- welmoedj <joe.dalton@xxxxxxxxxx> wrote: > Mike, > > The seat belt switch runs to ground, the important > wire is > purple/black and connects to the buzzer box under > the dash. The wire > actually is part of a 6-way wite plug that connects > to the buzzer box To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/