Someone suggested that I could just rewire the front speakers and still let the back speakers use the common ground. Will that work? Hank <heskin@xxxxxxxxx> wrote: Marv, What you suggest below will most likely NOT work on any current radio. The Craig uses a floating or common ground wire for all four speakers (or at least a common ground between the left and right, as I recall). This WILL totally fark up any current technology receiver that depends on dedicated (non-shared) grounds run to each speaker. So using the old harness wired up to a new radio will result in horrible fidelity, if the receiver even works at all. Before doing what you plan, you should search the archives for a long discussion about "floating grounds". -Hank #1619 On 10/27/06, Marv Williams <marv2020@xxxxxxxxx> wrote: > my plan is to cut the old wiring harness from the Craig radio, and rewire the old harness to my new radio speaker/power wires. This way I can just plug it back into the existing radio connection. --------------------------------- Check out the New Yahoo! Mail - Fire up a more powerful email and get things done faster. [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/