Hey group, A couple weeks ago I posted saying that my steering wheel turns back and forth a few degrees while braking, indicating possibly warped rotors. Today I took the rotors off and wanted to get them turned. Too bad they are already at minimum thickness... guess I'll have to order some new rotors up. On the other hand, after I reassembled everything, the wheel shimmy went away. The shop manual says to torque the calipers to 55 lbs, and I am positive they were quite a bit below that when I removed them, so perhaps that was the cause? Just in case anyone else has a similar problem. Andy Fargo, ND 1982 DeLorean DMC12 VIN 11596 [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/