Mike, I believe the wires for the otterstat come though the fiberglass wall in the same hole as the impulse coil wiring does (that's the bigger yellow connector on the left side under the ignition resistors). My wiring has been messed with too, but I bet you might find a butt-end connector or a couple of spades together right around there, unless they pulled the wiring for it out the other side, inside the car. Good thing you are fixing this wiring, constant fans are a bad idea for a number of reasons. Andy In a message dated 4/26/2006 5:46:55 P.M. Central Standard Time, cambpd@xxxxxxxxx writes: Hi, does anyone know where the two wires coming from the cooling fan otterstat switch plug in to? The previous owner has the cooling fans running all the time, but I want to have them controlled by engine temperature. The otterstat is still in the rear cooling pipe but all traces of the wiring are gone. Fargo, ND 1982 DeLorean DMC12 VIN 11596 [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/