Re: [DML] Front Ride Height Intentions - Documented Proof
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Front Ride Height Intentions - Documented Proof



I just measured my own car (100% original suspension), and it measured
in at 17.5 inches from ground to the bottom of the flat black front
bumper.  A full 1.5 inches more than the 16" as stated in your post
(and this is obviously not taking into account any "sagging" the front
suspension has done since it was built nearly 25 years ago).


Eric Campbell
Hickory, NC
VIN 1776


--- In dmcnews@xxxxxxxxxxxxxxx, "Mike Bosworth" <mike.bosworth@...> wrote:
>
> Hi All
> 
> It has always been quite a talking point on this side of the 'pond' 
> too, a number of documents i have sourced clearly show the 
> regulations in the US for bumper heights and damage caused by 
> impacts to these at the time of the production of the DeLorean. This 
> particular info is taken from:-
> 




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated