Re: [DML] Replacing lower ball joints
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Replacing lower ball joints



Is the collar like a big flat-washer or does it actually insert into, 
i.e. sleeve the hole that the ball joint is pressed into (would have to 
be paper thin for this).

Dave

--- In dmcnews@xxxxxxxxxxxxxxx, "bkp944" <bkp944@...> wrote:
>
> Elvis,
> 
> I don't have a picture of the reinforcing collars by themselves, but 
I 
> added a picture of them installed in the Photos area (PJ Grady Ball 
> Joint Reinforcement Collar album).
> 
> Rob should chime in on the specifics, but the collars press onto the 
> control arms first, then the ball joints are pressed in. 









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated