You can't get these fuel hoses at Checker. They have a plastic urethane lining with a rubber hose over it. The fuel pressures are much higher than any fuel hose Checker has would allow. You need to look closer at these parts - you can't just make them yourself! There are other stainless braided fuel hoses available but I am not sure if they are cheaper or more expensive than OEM. Remember - you are working on parts that can leave you stranded in the middle of nowhere. Why cheap out? Andy In a message dated 3/13/2006 5:12:43 P.M. Central Standard Time, seanhagan@xxxxxxxxx writes: What solvent do I use for the hoses? Any reason that I cannot use standard fuel hoses that you can buy at a place like Checker? Cutting them to length should suffice... Fargo, ND 1982 DeLorean DMC12 VIN 11596 [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/